Fluke Networks 26000900 Pro3000 Tone Generator and Probe Kit with SmartTone Technology

I had to trace a number of curcuits behind drywall in a home renovation project, this tool made it possible.

The tone is strong enough to easily find wires behind drywall, but this is also the source of my one and only complaint: If you have a box with several electrical lines going into it, even if you separate all the lines inside the box and at their “far” ends so that there is zeero continuity between separate lines, the signal still tends to “splash” onto all the other lines. In a box with three lines I got signal on all three even though the tone generator was only attached to one. This is more pronounced where the lines are closest together (at the box, of course). This led to some confusion when I was in a small closet and no matter where I put the probe I got signal! Imagine my surprise to see that the line I was tracing lead not only UP from the box to the ceiling, but DOWN to the floor as well…. and off to the side too! Whoops! That ain’t right! However with a little patience and understanding of what was happening I was able to eventually sort out the individual runs. Further from the box the signal drops off on the non-connected lines faster than on the connected line. So I had to take a few educated guesses as to where the line I was tracing might be, and then move far away from the box and look for it. With a few tries I found each line and traced them to their ends. Bottom line: this thing works, and it works thorugh drywall, but it still requires you to use some brains.

Check out the videos on You Tube that show how to best use these tools. On 100% open lines you connect the tone generator to TWO conductors and trace the line. When you think you have found the far end you short the two conductors together there and the tone changes. If the tone doesn’t change you have the wrong pair. Because of the signal splash-over this is important to know. This is essential in tracing lines in bundles as the splash factor would otherwise drive you crazy.

I found the quality of the the tool to be very good. Not flimsy at all. I expect years of service given normal care in handling. The tone generator has a nice lanyard to hang it by when you are attaching it to various wall boxes etc, so that you don’t wind up hanging it by its leads, a nice touch that should add to longevity. I like that it comes with a case to keep everything together since this is the sort of tool I will only use occasionally and if it is knocking about in my kit without a case I’d be sure to misplace one part or another.

Great tool must have

Komt niet eens door 3cm baksteen heen. Zeer slechte kwaliteit. Volgende keer gewoon weer een Kurth Tracker

One of the standout features of this kit is its accuracy and reliability. The tone generator produces a clear, steady tone that can be easily detected by the probe, even in noisy environments. The probe also has an adjustable sensitivity level, which allows users to pinpoint wires and cables with precision and accuracy.

Another benefit of the Fluke Networks 26000900 Pro3000 Tone Generator and Probe Kit is its durability and ruggedness. The kit is built to withstand the wear and tear of regular use, with both the tone generator and probe featuring tough exteriors and high-quality components. The kit also comes with a handy carrying case, which makes it easy to transport and keep all the components together.
Overall, the Fluke Networks 26000900 Pro3000 Tone Generator and Probe Kit is an excellent choice for anyone in need of a reliable, accurate, and durable tool for tracing wires and cables. While it may be a bit pricey, the high-quality components and reliable performance make it a worthwhile investment for professionals who rely on this type of tool regularly.
There is one thing that you should consider, the kit can be a bit heavy and bulky, which can make it more challenging to use in tight.